# T Series vertical shaft impactor

> Vertical shaft impactor for shaped aggregate and manufactured sand. Nine models in Light, Heavy and Mega ranges for shaping and manufactured sand.

- Type: Vertical shaft impactor
- Crushing principle: Impact
- Stage: Tertiary, Quaternary
- Applications: Manufactured sand, Quarry and aggregates, Industrial minerals
- Models: T 75, T 110, T 150, T 185, T 220, T 320, T 370, T 440, T 600
- Page: https://aarvex-ng.vercel.app/equipment/crushers/vsi/
- Request a quote: https://aarvex-ng.vercel.app/contact/?product=T%20Series%20vertical%20shaft%20impactor

## Overview

The T Series vertical shaft impactor shapes material through rock-on-rock crushing. It is used at the tertiary and quaternary stages to produce finely graded, cubical product for manufactured sand and high-quality aggregate.
Nine models in three ranges cover capacities from 60 to 775 t/h. Rotor speed and cascade feed are adjustable, so one machine can be tuned towards shape, throughput or fines.

## How it works

A high-speed rotor throws material against a bed of rock, so particles break against each other rather than against metal. This autogenous crushing gives a cubical product with low wear. An adjustable cascade sends part of the feed around the rotor to control shape and throughput.

## Features

- **Cascade adjustment.** Sets how much feed bypasses the rotor, to control particle shape, wear, throughput and gradation.
- **Hydraulic lid.** Opens hydraulically for chamber access, rotor inspection and wear-part replacement.
- **Variable rotor speed.** Higher speed produces more fines; lower speed gives a coarser product.
- **Replaceable rotor tips.** Wear-resistant tips change without dismantling the rotor, lowering wear cost.

## Specifications by model

| Specification | T 75 | T 110 | T 150 | T 185 | T 220 | T 320 | T 370 | T 440 | T 600 |
|---|---|---|---|---|---|---|---|---|---|
| Range | Light | Light | Light | Heavy | Heavy | Heavy | Mega | Mega | Mega |
| Maximum feed size | 25–27 mm | 25–27 mm | 25–27 mm | 37–40 mm | 37–40 mm | 37–40 mm | 45–55 mm | 45–55 mm | 45–55 mm |
| Rotor diameter | 690 mm | 690 mm | 690 mm | 880 mm | 880 mm | 880 mm | 990 mm | 990 mm | 990 mm |
| Rotor speed | 1,500–2,500 rpm | 1,500–2,500 rpm | 1,500–2,500 rpm | 1,100–2,100 rpm | 1,100–2,100 rpm | 1,100–2,100 rpm | 1,000–1,800 rpm | 1,000–1,800 rpm | 1,000–1,800 rpm |
| Motor power | 1 × 75 kW | 1 × 110 kW | 1 × 150 kW | 1 × 185 kW | 1 × 220 kW | 2 × 160 kW | 2 × 185 kW | 2 × 220 kW | 2 × 300 kW |
| Weight | 6,371 kg | 6,371 kg | 6,371 kg | 12,395 kg | 12,395 kg | 12,395 kg | 14,357 kg | 14,357 kg | 14,357 kg |
| Capacity, general crushing | 60–103 t/h | 66–168 t/h | 100–217 t/h | 125–298 t/h | 150–378 t/h | 200–545 t/h | 263–629 t/h | 315–725 t/h | 420–775 t/h |
| Capacity, shaping | 60–103 t/h | 66–168 t/h | 100–217 t/h | 125–298 t/h | 150–378 t/h | 200–545 t/h | 263–629 t/h | 315–725 t/h | 420–775 t/h |
| Capacity, fines | 60–92 t/h | 66–151 t/h | 100–193 t/h | 125–265 t/h | 150–332 t/h | 200–465 t/h | 263–554 t/h | 315–725 t/h | 420–775 t/h |

Figures depend on material, feed grading and closed-side setting. Values marked on request are not published.