Nine models in Light, Heavy and Mega ranges for shaping and manufactured sand.
Figures for the T 220. Capacities are indicative and depend on feed material, gradation, moisture, hardness and setting. Tell us your application and we will confirm the figure for it.
The T Series vertical shaft impactor shapes material through rock-on-rock crushing. It is used at the tertiary and quaternary stages to produce finely graded, cubical product for manufactured sand and high-quality aggregate.
Nine models in three ranges cover capacities from 60 to 775 t/h. Rotor speed and cascade feed are adjustable, so one machine can be tuned towards shape, throughput or fines.
A high-speed rotor throws material against a bed of rock, so particles break against each other rather than against metal. This autogenous crushing gives a cubical product with low wear. An adjustable cascade sends part of the feed around the rotor to control shape and throughput.
Sets how much feed bypasses the rotor, to control particle shape, wear, throughput and gradation.
Opens hydraulically for chamber access, rotor inspection and wear-part replacement.
Higher speed produces more fines; lower speed gives a coarser product.
Wear-resistant tips change without dismantling the rotor, lowering wear cost.
| Model | T 75 | T 110 | T 150 | T 185 | T 220 | T 320 | T 370 | T 440 | T 600 |
|---|---|---|---|---|---|---|---|---|---|
| Range | Light | Light | Light | Heavy | Heavy | Heavy | Mega | Mega | Mega |
| Maximum feed size | 25–27 mm | 25–27 mm | 25–27 mm | 37–40 mm | 37–40 mm | 37–40 mm | 45–55 mm | 45–55 mm | 45–55 mm |
| Rotor diameter | 690 mm | 690 mm | 690 mm | 880 mm | 880 mm | 880 mm | 990 mm | 990 mm | 990 mm |
| Rotor speed | 1,500–2,500 rpm | 1,500–2,500 rpm | 1,500–2,500 rpm | 1,100–2,100 rpm | 1,100–2,100 rpm | 1,100–2,100 rpm | 1,000–1,800 rpm | 1,000–1,800 rpm | 1,000–1,800 rpm |
| Motor power | 1 × 75 kW | 1 × 110 kW | 1 × 150 kW | 1 × 185 kW | 1 × 220 kW | 2 × 160 kW | 2 × 185 kW | 2 × 220 kW | 2 × 300 kW |
| Weight | 6,371 kg | 6,371 kg | 6,371 kg | 12,395 kg | 12,395 kg | 12,395 kg | 14,357 kg | 14,357 kg | 14,357 kg |
| Capacity, general crushing | 60–103 t/h | 66–168 t/h | 100–217 t/h | 125–298 t/h | 150–378 t/h | 200–545 t/h | 263–629 t/h | 315–725 t/h | 420–775 t/h |
| Capacity, shaping | 60–103 t/h | 66–168 t/h | 100–217 t/h | 125–298 t/h | 150–378 t/h | 200–545 t/h | 263–629 t/h | 315–725 t/h | 420–775 t/h |
| Capacity, fines | 60–92 t/h | 66–151 t/h | 100–193 t/h | 125–265 t/h | 150–332 t/h | 200–465 t/h | 263–554 t/h | 315–725 t/h | 420–775 t/h |
Capacities are indicative and depend on feed material, gradation, moisture, hardness and setting. Tell us your application and we will confirm the figure for it.
Used in:
Fixed-shaft cone crusher with a steep crushing angle for fine, even product.
Floating-shaft cone crusher for secondary and tertiary crushing.
Heavy-duty cone crusher with multi-actuator hydraulics for large-scale hard rock.
